Marble Granite

SW 2200 - SW 2000 - SW 1600

High performance multi-wire machine

The multiwire SW is definitely innovative both in appearance and performance. It is a machine with a two-column structure made using top-class solutions and components in order to provide the highest ...

Marble Granite

SW 1200 - SW 900

High performance multiwire machine

SW 1200 is a stationary multiwire machine directly derived from the larger SW, with which it shares most of the technology solutions, but which is characterized by the useful cutting width reduced to ...

Marble Granite

SW SH-3R

Mobile 3-wire machine

The new SIMEC-patented three-wire horizontal cutting machine takes automation to a new level in natural stone processing. The three wires automatically adjust their positions to match the thicknesses...

Marble Granite

SIMECWIRE /01

Monowire plants for cutting and squaring blocks

SIMEC completes its range of multiwire machines SIMECWIRE SW with different solutions for squaring blocks and cutting thick slabs by means of monowire machines. The SIMECWIRE/01 machines can be effi...

Marble Granite

SIMECWIRE /01 MOB

Monowire plants for cutting and squaring blocks

SIMECWIRE /01 MOB, besides having the same characteristics of the stationary version, it has the possibility to translate on tracks, thus turning out to be especially suitable to cut slabs. The transm...

Marble

SFERA

Telaio per marmo

The SFERA gangsaws have a rectilinear motion for the rapid sawing of marble blocks. The model SFERA is available in the version with 80 and 100 blades. The blade rack is at a fixed height, moved by a ...

Marble

M40 - M50

Open frame gangsaws for marble

SIMEC M40 and M50 are open-frame rectilinear motion gangsaws for the sawing of marbles and/or engineered marbles. These machines are the result of SIMEC’s great experience in manufacturing gangsaws,...

Granite

NT2 60+SM

Cutting centres for granite

These cutting centres, that range from 50 to 60 discs, are made up of two different and independent units. The first unit is used for vertical cutting, the second unit for horizontal cutting on mobile...

Marble

NT4

Block cutters for marble

Block cutter with 4 columns that can install up to 2 vertical discs with variable diameter of 1300 or 1700 mm. NT4 can be equipped with an automatic unloader of strips mod. AEREO NT4 (optional) and a ...

Marble Granite

MAXI 3000 - MAXI 3500

Sawing machines with jumbo disc

MAXI 3000 RX and MAXI 3500 RX are sawing machines with a jumbo disc for cutting marble and granite at the desired thickness. These machines follow the Simec philosophy of the NT2 block cutters, with ...

Marble Granite

MAXI 3000 MOB - MAXI 3500 MOB

Sawing machines with jumbo disc

The working centers MAXI RX MOB offer high precision requisites thanks to the translation system of the cutting bridge made with interchangeable steel “V” slides of high resistance, that can also ...

Granite

FX 2200 RS

Calibrating machine for granite slabs

High performance calibrating machine for granite slabs equipped with special spindles with an automatic adjustment system and calibrating heads, mod. C8. The machine is available with working useful...

Granite

F 600 RX

Calibrating machine for granite strips and tiles

High performance calibrating machine equipped with special spindles and calibrating heads, mod. C2 or C3. The machine can perfectly calibrate all sizes of granite tiles and does not require any repla...

Marble Granite

ORBITAL

Orbital polishing machines for granite or marble slabs

The oscillation of the bridge of a traditional polishing machine that moves several spindles at the same time represents a limit especially for irregular slabs. For this reason, SIMEC presents to the ...

Granite

NPG 2200 SX

High performance polishing machine for granite slabs

The new NPG 2200 SX granite polishers offer the highest levels of productivity; their dual brushless motors and the interpolation of the bridge’s movements with the belt allow the algorithm develope...

Marble

LM 2100 RS

Lucidatrice per lastre di marmo

Polishing machine for marble slabs, available with heads from 4 to 16, equipped with a 9.2kW motor for each spindle and with working pressure control fitted on each polishing head. The control panel h...

Marble

NPM 2200 RS /PM

High-performance combined polishing machine for marble slabs/strips

The NPM polishing machines are available also in the combined version for calibrating and polishing of marble slabs. The first mobile bridge (PM version) installs calibrating spindles, capable of cali...

Marble

COMBI LM 2100 RS

Calibratrice-lucidatrice per marmo

The LM 2100 RS is available in the combined version for polishing slabs and for calibrating and polishing strips and/or tiles. The calibrating is performed by special spindles that can be equipped wit...

Marble

HPM 650 RS - HPM 1000 RS

High performance polishing machines for marble

The HPM polishing machines are available in the version for strips, with useful working width of 650 or 1000 mm and are supplied in combined solutions for calibrating and dressing-polishing. The spin...

Marble

LM 650 RS - LM 1000 RS

Calibrating-polishing machines for marble

The LM RS models are marble polishing machines with mobile bridge, where the transversal movement of the bridge integrates with the circular motion of the spindles to ensure excellent polishing qualit...

Marble Granite

NP1

Polishing machine for marble or granite slabs with one head

The machine, that runs on rails and is equipped with one operating spindle, polishes slabs placed lengthwise on a cement supporting table. The machine can be easily loaded with a forklift since one si...

Marble Granite

NP2

Polishing machine for marble or granite slabs with two heads

The machine, equipped with two spindles, slides on rails while the material to be polished is placed on a cement surface. The finishing of slabs takes place in different passages, replacing the abrasi...

Marble Granite

NPK1 - NPK2

Polishing machine for marble or granite slabs with one head

The machine slides on rails and is equipped with one or two spindles according to the version, both versions are on concrete shoulders. The finishing of slabs takes place in different passages, replac...

Marble Granite

1 INT/0

Single-disc cross cutting machine for strips

The 1 INT/0 boasts the quality of solidity, precision and cutting capacity of SIMEC’s products but its characteristic is the non-automatic running of work. With the 1 INT/O the operator manually and...

Marble Granite Agglomeration

1 INT/L

Single-disc cross cutting machine for slabs

This head-cutting machine for slabs with width up to 2200 mm. optimizes the polishing work, eliminating any possible abrasive waste and useless points due to the natural asymmetry of the slab. The 1IN...

Marble Granite

AT1 RX

Automatic single-disc cross cutting machine for strips

This cross cutting machine for strips of width up to 650 mm has a very sturdy structure and boasts sophisticated electronics. With the AT 1 RX a sensor system recognizes the strip outline, the PLC whi...

Marble Granite

210 INT RX - 350 INT RX

Transversal cutting machines for strips

These cutting machines, which are structurally identical, process strips up to a width of 620* mm. and thanks to their powerful motors, they cut in a single passage thicknesses up to 40 mm. on granite...

Marble Granite

RAF 650 - RAF 1700

Longitudinal cutting machines for strips

These are very sturdy and reliable longitudinal cutting machines which cut strips up to 1700 mm. wide. These longitudinal cutting machines are available in the manual or sequential version with a num...

Marble Granite

TT 2200 RS

Transversal cutting machine for slabs

Transversal cutting machines for slabs with maximum size of 2200x3500 mm, available in marble, granite and marble/granite versions. The TT 2200 RS machines can be supplied in manual, sequential, simul...

Marble Granite

TL 2200 RS

Longitudinal cutting machine for slabs

Longitudinal cutting machines for slabs with maximum size of 2100x3500 mm, available in marble, granite and marble/granite versions; manual, sequential, simultaneous versions. The machine can cut thic...

Marble Granite

TL 2200 RS PM

Longitudinal cutting machine for slabs with mobile bridge

This cutting machine with mobile bridge allows to cut in several passages and is especially suitable for cutting thick pieces or or very hard material....

Marble Granite

TLS 2200 RS

Longitudinal cutting machine for thick slabs

This machine has been designed as a longitudinal cutting machine for thick slabs of marble or granite, wide up to 2200 mm. The TLS 2200 machine is available in the sequential or simultaneous version u...

Marble Granite

TTS 2200 RS

Transversal cutting machine for thick slabs

Available in the sequential or simultaneous version, the TTS 2200 machine can cut slabs of maximum sizes 2200x3500 mm. The spindles are fitted with a 15 kW motor, which allows the TTS 2200 machine t...

Marble Granite

SMM 600 - SMG 600

Chamfering machines for marble and granite

The machine performs the lateral grinding of tiles and the bevelling of all four sides of the tiles. All versions are equipped with a power-driven bridge that makes faster any format change while the ...

Marble Granite

QUADRA WET

Squadratrice per piastrelle e/o lastre di granito, marmo e gres porcellanato

Le squadratrici QUADRA WET garantiscono la perfetta squadratura a 90° e la bisellatura delle piastrelle e/o delle lastre; possono operare, a seconda della versione richiesta, su formati da 200x200 fi...

Marble Granite

QUADRA DRY

Squaring machine for tiles and/or slabs of granite, marble and porcelain ceramic

The QUADRA DRY squaring machines guarantee the perfect 90° squaring and the chamfering of tiles and/or slabs; they can operate, according to the version requested, on sizes from 200x200 up to 1600x32...

Marble Granite

Cyclic oven for slabs Mod. INFINITY

Cyclic systems for drying and catalysing

Cyclic ovens are used both for the drying and the catalysis of slabs or strips/tiles. The particularity of this typology of ovens lies in the fact that the material that enters the oven supported by a...

Marble Granite

Static oven for slabs Mod. PILOT

Multi-level ovens with inserter for drying and catalysing

The ovens model PILOT represent the most classical typology of slab ovens, used both for the drying of the material and for the catalysis of the resin. The lifting and inserting system, commonly calle...

Marble Granite

Block oven Mod. GENIUS ONE

System for the drying and catalysis of blocks to be consolidated

Thanks to over 40 years of experience in the restoring field, SIMEC has developed the GENIUS One, a solution that meets the requirements to reduce the drying and catalysis times, guaranteeing standard...

Marble Granite

Linear ovens with forced ventilation

In-line ovens with hot air, forced ventilation system, fed by gas or electricity, for slabs and strips / tiles.

Linear ovens for strips or tiles, with hot air and forced ventilation, fed by gas or electricity. The horizontal ovens, available in the version for slabs or for strips of granite, offer an efficient...

Marble Granite

UV rays linear ovens

Wide range of UV ray ovens, available in the version for slabs and strips/tiles, with high, medium or low power. ...

Marble Granite

Infra-red filling lines fed by electricity

SIMEC electrically powered infrared filling lines are designed for treating natural stone slabs, combining heating stages with filler application operations. Infrared technology heats the stone sur...

Marble Granite

Gas powered infrared filling lines

SIMEC gas-powered infrared filling lines are designed for treating natural stone slabs, integrating heating stages with filler application operations. Gas-powered infrared technology heats the ston...

Marble Granite

CUG and COMP accumulating systems

The insertion of accumulating systems on resining lines gives a better penetration of resin into the material thanks to the greater time it stays between the resining phase and the entrance in the cat...

Marble Granite

Anthropomorphic robot for automatic resin distribution Mod. RESIN ROBOT 2236

Automatic resin stations

SIMEC, to provide an adequate response, has developed a specific solution, based on the use of anthropomorphic robots, able to fully satisfy the required requirements. Absolute distribution precision ...

Marble Granite

Resin spaying machine, Mod. SPRAY

Resin spaying machines for slabs and strips

These machines spray the resin automatically on the slabs or strips of marble or granite. They are equipped with a variable quantity of spraying nozzles, depending on the requirements and feed speed...

Marble Granite

RES

Automatic filling-resining machines for slabs or strips

These machines automatically distribute the resin or the filler by a spatula on the slabs or strips of marble or granite. The mechanical action provided by the spatulas allow the resin to penetrate de...

Marble Granite

Automatic distributor of reinforcing net

Automatic distributors of reinforcing net for tiles or slabs

SIMEC produces automatic distributors of reinforcing net for tiles or slabs. These machines deposit automatically the reinforcing net on the material in transit, cutting the net at the right dimension...

Marble Granite

Vacuum decompression

Vacuum station

These machines facilitate the penetration of the resin, previously deposited on the surface of the slabs, into the micro-cracks and pores. The process is achieved by housing the slab in a vacuum chamb...

Marble Agglomeration

Decompression chamber with parametric vibration

Decompression chamber for vacuum impregnation of slabs with parametric vibration system

Thanks to the innovative vibro-parametric technology created by SIMEC laboratories, VU-VIB allows the resin to penetrate perfectly into the micro-cracks and porosity of the material. ...

Marble Granite

Mezzanines for resin bins

SIMEC supplies mezzanines housing containers of resin and/or pumps and distributors for the automatic resining area. Mezzanines are made in different sizes to satisfy all the customers’ needs. They ...

Marble Granite

RAPID RS

Automatic loader/unloader

RAPID RS evo is a completely new robot that bases its success on the speed and fluidity of movement. The high number of suction pads equipping the system along with a suction system divided into indep...

Marble Granite

SKY

Portal type robot

In the most modern plants, the loading and unloading operations of slabs are very important production aspects. In the plant illustrated in this page, the system can load and unload slabs on different...

Marble Granite

FINGER -C

Automatic loader

The machine has been devised and produced for the automatic loading of slabs on the processing line....

Marble Granite Agglomeration

FINGER -S

Automatic unloader

...

Marble Granite

RB

semi-automatic loader/unloader

The machine has been designed and manufactured for the semi-automatic loading of slabs into the processing line....

Marble Granite

AEREO

Automatic unloaders for block cutters

In addition to cutting centres, SIMEC produces excellent aerial unloaders that complete the strip production installation. This accessory, indispensable on modern block cutters, that are too fast for ...

Marble Granite

CAR/P

Automatic loaders/unloaders for strips

SIMEC manufactures automatic loaders/unloaders for strips or tiles capable of feeding high-productivity polishing plants. The translation speed of the suction cup-carrying arm along with a powerful va...

Marble Granite

Connecting roller conveyors for slabs

...

Marble Granite

Connecting roller conveyors for strips

...

Marble Granite

Trolleys for conveying material

...

Marble Granite

Handling systems for slabs

...

Marble Granite

Deviation systems for strips and tiles

...

Marble Granite

RIB

Barrel Overturner for slabs

...

Marble Granite

Finishing units for slabs

...

Marble Granite

Finishing units for strips / tiles

The drying chamber installs two powerful ventilation units that take the air from under the material in negative pressure ventilation and blow it onto the surface through 5 blowers creating positive p...

Marble Granite

Automatic waxing machine

In polishing plants it may be advisable to insert a waxing machine. This product allows to carry out automatically the spraying and spreading of a protective-polishing wax layer that defends slabs fr...

Marble Granite

ET/BC-A

Labelling machine ET/BC-A

The machine enables the automatic application of a label on the material. The label can be customized in every aspect with specific information for each slab, when available from the detection systems...

Marble Granite

MGI EVO

Slab marking and tracing system

SIMEC has developed a special ink jet marking system for slabs which is capable of writing data, symbols, bar codes directly on the edge of the material. In order to achieve such result, SIMEC uses pr...

Marble Granite

SV/EAO

Automatic distributor of nylon

La macchina svolge automaticamente un film in polietilene (nylon) dopo un apposito processo elettrostatico che ne garantisce l’aderenza alla superficie lucida. La macchina può installare al suo int...

Marble Granite Agglomeration Ceramic

SV/ADH

Automatic horizontal unwinder unit for adhesive nylon

The machine automatically unwinds an adhesive polyethylene film on the polished side of the slab. The machine can install 2 coils of different widths in order to optimize the production according to t...

Marble Granite

BT1

Automatic distribution of plastic protection cord

The automatic applicator of polymer dots BT1 is the most ecological and economical way to protect the polished surface of the slabs when they are placed and handled “in packs”. The BT1 is placed a...

Granite Agglomeration

C8

The Testarossa C8 have a higher removal capacity, guaranteeing a great planarity and an excellent finishing of the material processed. The C8 heads, thanks to their characteristics, are used in the ca...

Granite

C2 - C3

These products have proven to have a higher removal capacity, guaranteeing a great planarity and an excellent finishing of the material processed. The C2 and C3 heads, thanks to their characteristics,...

Granite

C5

Specifically designed to be used with diamond tools, this type of head is particularly suitable for the roughing phase of hard materials. Characterised by high removal capacity and perfect flatness o...

Granite

SATELLITE

It is a particularly flexible head which may be used both in roughing and polishing phases thanks to the use of tools of appropriate grain. SIMEC has developed three versions of this product suitable...

Granite

DOUBLE SPEED

Featuring a slow speed of the head with respect to the fast speed of the tools, this product is ideal for high removal capacity, excellent planarity of the material and high performance of the diamond...

Granite

HPC6

The tangential TESTAROSSA SIMEC mod. HPC, take advantage of the particular solution with coaxial working axes, to offer better polishing performance, higher productivity and lower and more uniform too...

Granite

HP8

The tangential heads TESTAROSSA mod. HP have the advantage of the special solution with misaligned working axes and tools placed on two different working diameters, as to offer better polishing perfo...

Granite

SAP

This is a head that can be equipped with felts or brushes for the last level of finishing, giving an excellent brilliance to the material. The head works exclusively in combination with a special spin...

Marble Granite Agglomeration Ceramic

STRATOS 625 CNC

Bridge sawing NC machine with rotating head

Numerical control bridge saw with 5 interpolated axes for cutting slabs of marble, granite and agglomerate up to 200 mm thick by means of a disc with max. diameter of 625 mm. Accurate and sturdy, it ...

Marble Granite Agglomeration Ceramic

QUASAR 725 CNC

Bridge sawing NC machine with rotating head

Numerical control bridge saw with 5 interpolated axes for cutting slabs of marble, granite and agglomerate up to 250 mm thick by means of a disc with max. diameter of 725 mm. Accurate and sturdy, it ...

Marble Granite

NEXT 1200 ADVANCE

Bridge sawing machine

The ADVANCE version, considered as the evolution of the NEXT 1200, differs for the more advanced electronics, the big colour touch screen control panel and the StoneLab software. The machine can per...

Marble Granite

EXCEL FC 1200

Bridge sawing machine

Featuring the possibility to work both as a saw and a contouring machine, the EXCEL FC is made in the version with disc of 1000 mm in diameter, run of the Z axis of 1200 mm and motor of 30 kW. The ele...

Marble Granite

BORDI P

Automatic edge polishing machines for square edges of marble, granite and agglomerated marble

The new automatic edge polishing machine BORDI P702 for square edges is made with frontal floating spindles for polishing marble and granite edges. The structure of the machine has a high protection d...

Marble Granite

BORDI T

Automatic edge-polishing machine for obtaining bullnosed, inclined and flat profiles of marble, granite and agglomerated marble.

The edge-polishing machine BORDI T804 and BORDI T604 are completely automatic machines that, thanks to their versatility, allow to easily range from the plain step to kitchen countertops. These machin...

Marble Granite Agglomeration Ceramic

IMAGE SHARE MATRIX 4.0

Slab image detecting and recording system

The IMAGESHARE system can be supplied in the MATRIX 4.0 variation, as an alternative to the standard linear scanning system, with a state-of-the-art matrix detecting system with high resolution, capab...