IT
EN
BR
Multi-Wire machines
Mono-Wire Machines
Blade Gangsaws
Block Cutters
Sawing machines with jumbo disc
Filter by material:
Filter by format:
Multi-Wire machines
SIMEC has been among the first companies in the world to manufacture a diamond-wire cutting machine that can overcome the productivity and simplicity of handling traditional blade gangsaws. Strong of the results we have gained, we expanded the project by implementing a full range of products that attract success and admiration around the world.
SW 2000
High performance multi-wire machine
The multiwire SW is definitely innovative both in appearance and performance. It is a machine with a two-column structure made using top-class solutions and components in order to provide the highest reliability standards. The multiwire SW, with identical technical solutions and supporting structure, are available with different cutting widths as to meet the customer’s specific needs. Besides, when purchasing the machine, it can be configured to operate with three different diameters of wires enabling a variety of possible versions.

Marble
Granite
Blocks
SW 1200
High performance multiwire machine
SW 1200 is a stationary multiwire machine directly derived from the larger SW 2000, with which it shares most of the technology solutions, but which is characterized by the useful cutting width reduced to 1200 mm and for the smallest number of usable wires. The machine is ideal for cutting blocks of any size, to obtain 2-3 cm thick sheets, as well as to make large thickness cuts, especially used in the funeral art market.

Marble
Granite
Blocks
Mono-Wire Machines
SIMEC completes its range of multiwire machines SIMECWIRE SW with different solutions for squaring blocks and cutting thick slabs by means of monowire machines.
SIMECWIRE /01
Monowire plants for cutting and squaring blocks
SIMEC completes its range of multiwire machines SIMECWIRE SW with different solutions for squaring blocks and cutting thick slabs by means of monowire machines. The SIMECWIRE/01 machines can be efficiently used for preparing blocks to the next cutting phases, performed by multiwire machines or they can also be directly used for sawing blocks into slabs, assuring the highest standards in terms of accuracy and productivity for this typology of machines.

Marble
Granite
Blocks
SIMECWIRE /01 MOB
Monowire plants for cutting and squaring blocks
SIMECWIRE /01 MOB, besides having the same characteristics of the stationary version, it has the possibility to translate on tracks, thus turning out to be especially suitable to cut slabs. The transmission of the movement on tracks is obtained by a precise pinion-rack system controlled by brushless motors and encoders on both sides, as it takes place on the most precise tool machines. For squaring blocks, the machine can be equipped with a rotating trolley.

Marble
Granite
Blocks
Blade Gangsaws
SFERA
Telaio per marmo
The SFERA gangsaws have a rectilinear motion for the rapid sawing of marble blocks. The model SFERA is available in the version with 80 and 100 blades. The blade rack is at a fixed height, moved by a double connecting rod, whilst the block carrying trolley is installed on a platform and rises towards the diamond blades.

Marble
Blocks
Slabs
M40 - M50
Open frame gangsaws for marble
SIMEC M40 and M50 are open-frame rectilinear motion gangsaws for the sawing of marbles and/or engineered marbles. These machines are the result of SIMEC’s great experience in manufacturing gangsaws, with thousands of marble gangsaws all over the world, and in the utilisation in the most modern CAD technologies, that allow a precise calculation of the efforts sustained by each single piece.

Marble
Blocks
Block Cutters
NT2 60+SM
Cutting centres for granite
These cutting centres, that range from 50 to 60 discs, are made up of two different and independent units. The first unit is used for vertical cutting, the second unit for horizontal cutting on mobile bridge, which allows the horizontal disc to enter the cutting cycle after several vertical cuts have been carried out.

Granite
Blocks
NT4
Block cutters for marble
Block cutter with 4 columns that can install up to 2 vertical discs with variable diameter of 1300 or 1700 mm. NT4 can be equipped with an automatic unloader of strips mod. AEREO NT4 (optional) and a block carrying trolley (optional).

Marble
Blocks
Sawing machines with jumbo disc
MAXI 3000 - MAXI 3500
Sawing machines with jumbo disc
MAXI 3000 RX and MAXI 3500 RX are sawing machines with a jumbo disc for cutting marble and granite at the desired thickness. These machines follow the Simec philosophy of the NT2 block cutters, with 2 columns fixed to the ground and the mobile block carrying trolley, to guarantee the absence of vibration, high productivity and long diamond lifetime.

Marble
Granite
Blocks
MAXI 3000 MOB - MAXI 3500 MOB
Sawing machines with jumbo disc
The working centers MAXI RX MOB offer high precision requisites thanks to the translation system of the cutting bridge made with interchangeable steel “V” slides of high resistance, that can also be ground, as well as the precision motors and reducers, synchronized by encoder on each column. Once the machine places itself on the cutting point, it locks its position as to avoid vibrations and accidental movement.

Marble
Granite
Blocks